How To Sew a Curtain In 2024

A Beginner’s Guide to Making Your Own Curtains

Have you ever longed for changing a room basically by changing the shades? These flexible window medicines can lift your space, adding a hint of character, security, and light control.

Envision surging sheers that relax the daylight or sumptuous velvet window hangings that make an emotional feel. With just enough preparation and some fundamental sewing abilities, you can rejuvenate your fantasy draperies!

In this guide we will complete explain about How To Sew a Curtain In 2024. and make it easy to sew your curtain.

What You’ll Need to Get Started

Assemble your devices and release your innovativeness! To leave on your shade sewing venture, you’ll require a few essential supplies:

  • Texture of your decision (we’ll examine texture determination exhaustively later)
  • Sewing machine
  • Measuring tape
  • Scissors (texture scissors or a rotational shaper for smoother cuts)
  • Pins
  • Iron
  • Thread (coordinating or differentiating variety relying upon your ideal look)

Measuring for Perfect Fit

Taking exact estimations is the foundation of making great fitting draperies. Shades that are too short or restricted can leave holes along the edges or base, compromising protection and light control.

Then again, unreasonably lengthy or wide drapes can pool on the floor or bundle clumsily, degrading the general look. Putting a couple of moments in precise estimating guarantees your completed draperies hang wonderfully and capability perfectly.

Measuring for Curtain Length

  • Settle on your ideal length. Floor-length shades make a more proper look, arriving at right down to the floor (or somewhat above on the off chance that you anticipate adding puddle trims). Ledge length shades give a more relaxed stylish, normally finishing just beneath the window ledge.
  • Measure from the mounting point. Begin at the highest point of your window outline (or the ideal arrangement of your drapery pole) and stretch out the estimating tape down to where you maintain that the fix of your completed shade should fall.
  • Think about mounting style. Assuming you’re utilizing drape rings or clasps, calculate the level of the equipment while estimating.
Measuring for Perfect Fit

Measuring Window Width

  • Measure the genuine window width. Broaden the estimating tape across the window opening, from one inside wall to the next. Take the estimation at the top, center, and lower part of the opening to represent any abnormalities. Record the most extensive estimation.
  • Calculate completion. To make a decent wrap, duplicate your window width by 1.5 to twice. For instance, assuming your window measures 36 inches wide, you’ll require shade boards that are 54 to 72 inches wide (36 x 1.5 = 54 or 36 x 2 = 72). This additional texture permits the shades to assemble effortlessly when moved shut.

Choosing a Curtain Heading Style

The drape heading style you pick assumes a critical part in both the feel and usefulness of your completed shades. It decides how the texture accumulates at the top, influencing the completion and wrap of the shades.

Also, the heading style directs how the draperies hold tight the bar, impacting the simplicity of opening and shutting. Consider these variables while choosing a going to accomplish the ideal look and usefulness for your windows.

Cutting Your Fabric

Importance of Layout

Prior to jumping into the cutting, pause for a minute to design your texture format. This limits squander and guarantees effective utilization of your material.

Assuming you’re working with designed texture, consider the example rehash – the distance between indistinguishable components in the plan. Spread out the texture boards so the example matches consistently across the completed shades.

Following Your Measurements

Recall those estimations you took in Segment II? This present time’s the opportunity to effectively utilize them! Allude back to your notes for the ideal shade width and length, considering in crease recompenses (commonly 1 inch on each side and base). This guarantees your completed shades fit your windows impeccably and have the totality you want.

Pinning the Fabric

For precise slicing and to keep the texture from moving while you do something amazing, sticking is fundamental. Pin the texture layers together, right sides confronting one another, along the assigned crease lines. Match creases and selvages (the completed edges of the texture) definitively for a cleaned look.

Cutting Techniques

Sharpness is critical! Utilize a decent sets of texture scissors or a rotational shaper with a new cutting edge for spotless, straight cuts. A straightedge guarantees those cuts are genuinely direct.

In the event that you really want to stamp straight lines on the texture for reference, designer’s chalk or a texture pen are your companions. Keep in mind, these markings can as a rule be brushed away effectively whenever you’re finished cutting.

Cutting Your Fabric

Sewing Your Curtains: Step-by-Step Guide

Preparing Your Sewing Machine

Prior to plunging into sewing, prepare your machine. Select a straight line for most creases on your shades. This line makes areas of strength for a dependable association between texture pieces.

Pick your string tone. For an exemplary look, use string that matches your texture. On the off chance that you believe that the sewing should be a plan component, pick a differentiating tone.

Sewing the Side Seams

1. Sticking for Accuracy:

Lay your texture boards level with right sides (the lovely sides) confronting one another. Match the creases (the made completed edges) and selvages (the woven edges that normally forestall fraying) of the two boards.

Pin them together along the whole length, guaranteeing everything lines up uniformly. This sticking step keeps the texture from moving while at the same time sewing and ensures straight creases.

2. Backstitch for Strength:

With your sewing machine prepared, begin at the base corner of one board. Select the opposite join button (frequently a little button with a retrogressive confronting bolt) and sew a couple of fastens backward. This makes a backstitch, which builds up the start of your crease and forestalls disentangling later.

3. Sewing the Crease:

Switch your machine back to a customary straight join. Sew along the stuck crease, keeping a steady crease remittance (ordinarily 1 inch) from the crude edge. A crease stipend is the additional texture you leave on one or the other side of a crease that gets collapsed under and sewed to make a spotless completion.

4. Finishing the Raw Edges:

Raw edges are the incomplete cuts of texture that can shred over the long haul. In the wake of sewing the side crease, finish the crude edges to forestall fraying. You have two choices:

  1. Zigzag Stitch: Select a zigzag stitch on your machine. This line makes a zooming design along the crude edge, encasing the strands and keeping them from disentangling.
  2. Pinked Shears: On the other hand, use pinking shears to cut the crude edges. These shears have a sawtooth edge that cuts the texture with little crisscrosses, accomplishing a comparative impact to the crisscross join.
Sewing Your Curtains: Step-by-Step Guide

Creating the Hem

A great trim adds an expert touch to your drapes. This is the way to make a perfect twofold trim:

Folding the Hem: Overlay the crude base edge of the texture two times towards some unacceptable side (the side that won’t be noticeable when the drapes are hanging). The principal crease ought to be founded on your ideal fix remittance (commonly 2-3 inches).

Pin the overlay set up to get it. Then, overlay again along the past crease to make a twofold layer. The last overlap will normally be ½ inch to 1 inch contingent upon your inclination.

Sewing the First Fold: With the trim stuck set up, sew a straight fasten along the principal overlap (nearer to the crude edge). This line gets the collapsed edge and encases the crude texture.

Sewing the Second Fold: Presently, overlay the trim one final time as per the last crease you made (ordinarily ½ inch to 1 inch). Sew another straight fasten near the principal overlay, encasing the crude edge inside the twofold trim. This makes a perfect and completed look.


From choosing the ideal texture and fastidiously arranging your plan to sewing each crease and adding final details, you’ve set out on an inventive excursion.

This guide engaged you to change basic texture into lovely, specially designed drapes that impeccably supplement your space. Pause for a minute to see the value in the feeling of achievement – you’ve made something practical and snappy with your own two hands!

Leave a Comment